If you've ever found yourself puzzled when trying to figure out what size nut you need for a bolt, you're not alone. The many different sizes can be overwhelming and confusing. When you learn that there is a US standard measurement system and a metric measurement system, you might all but give up. Regardless of these variations, measuring the size of a nut doesn't have to be a mystery. A nut has five ways that it can be measured. When matching a nut to a bolt or a wrench to a nut, two of the ways to measure solve most of the mating problems.
Looking at the photos above the drum is 8' deep x 12' wide. This is an 8' x 12' tom. So a 5' X 14' drum is 5' deep with a 14' width. The width is also referred to as the head size. So that is usually called a 14' drum. Subtract your band size (Step 1) from your bust measurement (Step 2) and refer to the cup size chart here. Example: 37 inches (bust) – 34 inches (band) = 3 inches. That’s a 34C.
Measuring Between the Flats
Step 1
Lay the nut on a flat surface so that the hole lays flush.
Step 2
Place the end of a measuring tape on one of the flat sides of the nut's outer perimeter.
Stretch the tape measure across the nut's diameter to the flat-side directly across from the one your pulling from. If the nut is metric, count the number of lines on the tape measure to find the measurement. If you count 9 lines, the size is a 9-mm (millimeter) nut. If the nut is US standard, count the smallest lines on the tape measure in sixteenths. Add the sixteenths together to find the size. If you count 11 lines, the size of the nut is 11/16. You can also measure from point-to-point to find the 'Whitworth system' measurement. Instead of measuring from flat to flat, you measure from point-to-point on the hexagon. These two measurement methods help you know what size wrench or socket to use on a nut.
Measuring for Diameter
Step 1
Lay the nut down as you did in Section 1. Set the end of the tape measure at one side of the inner threads of the nut.
Step 2
Stretch the tape measure to the other side of the inner threads of the nut.
Count the lines to find the diameter of the threaded hole. Measure across the widest opening the threads make. This measurement will help you match the thread diameter of the nut with the thread diameter of the bolt.
Measuring for Thread Coarseness or Fineness
Step 1
Count the number of threads along the inside thickness of the nut. Use a magnifying glass and a pin to keep track of the threads.
Step 2
Figure the threads per inch of nut thickness. A nut with 16 threads per inch has coarse threads, while a nut with twenty threads per inch is fine thread. If the nut is 1/4-inch thick and that 1/4-inch has 4 threads, the nut is coarse-threaded. If the nut has five threads in that 1/4-inch thickness, the nut is fine-threaded. To measure nut thickness, hold the nut between your fingers and measure the perimeter parallel to the nut's hole.
Tips
- Some nuts have right-hand threads while others have left-hand threads. If you can't get a nut off or get it to go onto a bolt, try turning it in the opposite direction and maybe it will come off.
- Right-hand threads turn clockwise (right) to tighten and counterclockwise (left) to loosen.
- Left-hand threads turn counterclockwise (left) to tighten and clockwise (right) to loosen.
- Another way to find the nut size is by trying a bunch of different wrenches on the nut until one fits.
Items you will need
![Meassure Tom Size Meassure Tom Size](/uploads/1/2/5/6/125630682/299728936.jpg)
- Flat surface
- US standard tape measure
- Metric standard tape measure
- Paper
- Magnifying glass
- Pin
- Ablestock.com/AbleStock.com/Getty Images
More Articles
Automotive tires have four measurements to consider, while the wheels or rims they sit on have two. Rims are measured in diameter and width, according to the tires they fit. Tires are measured by section width, section height or profile, rim diameter and tread width. Tread width merely notes the spread of a tire's tread as it meets the road, and doesn’t factor into rim size.
Step 1
Measure the rim width. This is noted in inches anywhere from 5 inches for small passenger cars, to 91/2 inches for trucks and trailers.
Step 2
Measure the rim diameter. Take the diameter measurement from the inside groove that the tire bead sits on. It’s easiest to measure the inner diameter of the tire after it’s removed from the wheel. If you measure the outer diameter of the rim itself, it will be almost an inch larger than the specific size.
Step 3
Measure the tire size by looking at the width, height and inner diameter of a tire. The size is written on the outer sidewall. P205/40R16 is a common tire size notation showing all these. The 'P' indicates passenger car. The '205' is the width at the widest point between the sidewalls in millimeters. The '40' signifies ratio of height to width (aspect ratio), also known as profile or series. The 'R' stands for radial and the '16' is the rim diameter in inches.
Match tires to rims. Select a rim with the diameter of the tire. Use manufacturer-approved ratings to find an accommodating width. Tires are able to be mounted on rim widths that vary from 1 1/2 to 2 inches. Tire manufacturers specify approved width ranges.
Tip
- Consider load ratings before finalizing a tire purchase.
Warning
- Never mount a tire on a rim with an unapproved width.
- detail of a car tire image by Albert Lozano from Fotolia.com